Beer Making
Spare parts for beer barrels
-
8 gram CO2 Bulb - pack of 10
£4.99More information
These bulbs, 2 1/2" long and 3/4" in diameter, contain 8 grams of Carbon Dioxide, and can be used both in Sodasyphons as well as in suitable gas injectors.
-
8 gram Nitrous Oxide Bulbs - pack of 10
£5.00More information
These bulbs, 2 1/2" long and 3/4" in diameter, contain 8 grams of pure food grade Nitrous Oxide, and can be used (with a suitable adaptor) to inject gas into stouts or other ales.
They can also be used with some models of whipped cream makers. -
Barrel Cap Spanner - 4"
£2.50More information
This plastic spanner aids removal of 4" barrel caps such as the Brewmaster Keg, King Keg, and Rotokeg.
It is not recommended to be used to tighten the cap in the first place as, provided that the O ring has been lubricated, it needs only to be screwed down hand tight. -
Barrel Valve - deep drilled for use with either 8g bulbs or S30's
£9.50More information
This barrel valve has an insert with a reversible bulb piercing pin.
With the pin facing up the valve can be used with a suitable 8g bulb holder and bulbs.
With the pin reversed and pointing downwards the valve can be used with S20 or S30 gas cylinders.
Either way up it can also be used with a Widget Gas System. -
Barrel Valve - for use with 8g bulbs only
£9.50More information
This barrel valve is fitted with bulb piercing pin which is not removable.
It can be used, with a suitable bulb holder, with 8gm bulbs but is not suitable for use with either S20 or S30 gas cylinders. -
Basic Barrel 2'' WH Drilled Cap with washer
£1.99More information
This cap, which is bored to accept a barrel valve, fits those barrels with a white flat-sectioned cap washer.
-
Basic Barrel 2'' WH Vented Cap with washer
£2.25More information
This cap, which has a moulded in Relief Valve, fits those barrels with a white flat-sectioned cap washer.
-
Basic Barrel WH 2'' Cap + O ring and Brass Pin Inlet & Relief
£12.99More information
This cap has a combined inlet & pressure release valve fitted with a pin to pierce 8 gram CO2 bulbs and it comes complete with a red plastic CO2 bulb holder. The pin makes this cap and valve unsuitable for use with any other form of gas injection cylinder. The seal between this cap and the barrel is made with a white flat-sectioned washer.
-
Basic Barrel WH 2'' Cap with O ring and Brass Inlet & Relief Val
£9.99More information
This cap has a combined inlet & pressure release valve and fits the latest Weltonhurst 5gallon basic barrels. It can be used with either a Hambleton Bard Super 20 or Super 30 cylinder, a Sodastream cylinder fitted with a Sodastream valve adaptor or with a Hambleton 8 gram bulb Gas Injector. The seal between this cap and the barrel is made with a white flat-sectioned washer.
-
Basic Barrel WH 2'' Vented Cap Relief Seal - White
50pMore information
This seal fits over the relief valve pin in the centre of the Basic Barrel 2" WH vented cap.
