Beer Making
Spare parts for beer barrels
-
Spare Red Plastic Bulb Holder to fit Youngs 8 gram Bulb Injector
£3.00More information
This is the spare bulb holder to fit the Young's Brass Combined Gas Inlet and Relief Valve.
-
Tap Backnut
30pMore information
This has a 3/4" BSP thread and it fits the Plastic Drum Tap fitted to Beersphere, Brewcraft and King Keg barrels.
-
Tap Washer - Black
90pMore information
A replacement tap washer which makes the seal between the body of the barrel and either a lever or drum style tap.
-
Weltonhurst Brass Barrel Valve Inlet Sealing Sleeve - Black
50pMore information
This is the inlet seal for the combined gas inlet and pressure relief valve which is fitted to Bottom and Top Weltonhurst King Kegs, Brewmaster Kegs and to Basic Barrels.
-
Weltonhurst King Keg Cap O Ring & Spares Kit
£3.69More information
A complete set of cap and valve seals for either the top or bottom tap King Keg, consisting of the clear cap 'O' ring, the black valve sealing washer, the black gas inlet sealing sleeve, the brown pressure release rubber and the black injection valve 'O' ring.
-
Weltonhurst Valve Sealing Washer - Black
60pMore information
This black sealing washer fits on the flange of many barrel valves and makes the seal between the valve and the barrel cap.
-
Young's 8 gram Bulb Injector
£9.99More information
This unit consists of a Brass Combined Gas Inlet and Pressure Relief Valve fitted with a Stainless Steel Pin to pierce 8 gram CO2 bulbs and a red gas bulb holder. The valve will need to be fitted into a barrel cap that has been drilled to accept it and as such cannot be fitted to a basic 2" barrel cap with a moulded in pressure relief valve.
If your barrel is already fitted with a brass threaded valve and you want to use 8 gram bulbs with it you should consider the Hambleton Bard 8 gram bulb gas injector.
