General
Glass and plastic bottles in a range of capacities.
-
Amber Glass Crown Cap Beer Bottles - 500ml
from £3.90
These are sturdy amber glass beer bottles of 500ml capacity.
These have excellent longer term storage properties.
They are about 25cm tall and they accept standard size (26mm) crown caps.
They will keep beverages in optimum condition for long periods whilst allowing them to mature & develop.
There are limited quantities of the 330ml size: sales@hopshopuk.com.
In common with the shipping of all glass products, whilst every effort is made to pack with great care they are shipped at customers risk of breakage.
Offered here in easy quantum packs.
You may also require...
-
Twin Lever Crown Capper
£12.99More detail and information
Of a rugged all nylon construction I believe this to be the best quality twin lever capper available.
Capturing the cap with its magnetic part & crimping it with its spring assisted mechanism, this is a simple choice. -
Colt Capper
£28.50More detail and information
The Colt Capper is a height adjustable, steel bodied bench capper.
To use it simply raise the handle, pull back the red trigger to allow the movable head to be set to the right height for your bottles and then release the trigger to lock the head firmly in place.
The capper is now ready to be used to seal crown cap bottles, which it does effectively working with the forearm in a pulling lever-type action with the minimum of exertion, accommodating bottles from 3" to 14"in height. -
Crown Caps
£1.75More detail and information
Standard beer bottle size crown caps, 26mm diameter, in packs of 100.
-
Bottle Filling Stick
£3.95More detail and information
Simplify bottling.
A brilliant yet simple device to minimise disappointing spillages.
This Canadian made bottle filler is fitted with a spring free gravity led valve at it's base.
To fill simply allow the filler to rest on the bottom of the bottle.
The weight of the filler itself is sufficient to open the valve and allow flow.
To stop, simply lift the tube from the base of the bottle, and the flow will stop.
This works equally well with either wine or beer. It best used with 5/16'' syphon tubing. -
Syphon Tubing PVC - 5/16'' internal diameter
£1.20More detail and information
A 2-metre length of food grade PVC tubing with 1/16" wall thickness.
If you order 2 units of this item you will receive one 4- metre length in one piece, 3 units as a 6 metre length etc. -
Floor Standing Capper & Corker
£79.99More detail and information
This manual stand capper/corker is suitable for capping plus corking & is a wonderful two in one adjunct to any beer & wine producer.
It comes with a capping adaptor which will cap upto normal 26 mm caps.
With the handle down this substantial capper/corker has an overall height of 95cm.
It is fitted with brass cork presses for durability and is suitable for regular homebrew use. -
45 Bottle Drainer - Rotating Base
£17.49More detail and information
Take the chore out of cleaning bottles.
An Italian made 45 bottle tree which holds beer & wine bottles allowing them to drain after washing and rinsing.
It is all plastic, has a rotating base with a maximum diameter of 39cm, and the overall height is 51cm.
An absolute boon minimising the chore of washing bottles.
Use with the associated rinser reservoir. -
Bottle Rinser - fits 45 Bottle Drainer
£14.99More detail and information
This rinser in designed to fit onto the top of the 45 bottle tree.
Firstly fill the bowl with sulphite solution (e.g. Sodium Metabisulphite or VWP at the rate of a tea-spoonful per litre of water) and then push the clean bottle down on the spring loaded pump.
The solution is pumped into the bottle sterilising all its internal surfaces.
Then place the bottle onto the tree to drain (there is no need to rinse off the sulphite) and in ten minutes the bottles are ready for use. -
80 Bottle Drainer - Stationery Base
£18.25More detail and information
Minimise the task of bottle washing.
An Italian made 80 bottle tree which holds beer & wine bottles allowing them to drain after washing and rinsing.
It is all plastic, has a non rotating base with a maximum diameter of 40cm, and the overall height is 65cm.
An absolute boon minimising the chore of washing bottles.
Use with the assoiated reservoir. -
Bottle Rinser - fits 80 bottle drainer
£15.75More detail and information
This rinser in designed to fit onto the top of the 80 bottle tree. Firstly fill the bowl with sulphite solution and then push the clean bottle down on the spring loaded pump. The solution is pumped into the bottle sterilising all its internal surfaces.
Then place the bottle onto the tree to drain (there is no need to rinse off the sulphite) and in ten minutes the bottles are ready for use.
