Beer Making
Spare parts for beer barrels
-
Barrel Valve - deep drilled for use with either 8g bulbs or S30's
£9.50
This barrel valve has an insert with a reversible bulb piercing pin.
With the pin facing up the valve can be used with a suitable 8g bulb holder and bulbs.
With the pin reversed and pointing downwards the valve can be used with S20 or S30 gas cylinders.
Either way up it can also be used with a Widget Gas System.
You may also require...
-
Weltonhurst Brass Barrel Valve Inlet Sealing Sleeve - Black
50pMore detail and information
This is the inlet seal for the combined gas inlet and pressure relief valve which is fitted to Bottom and Top Weltonhurst King Kegs, Brewmaster Kegs and to Basic Barrels.
-
Hambleton Bard Inlet Sealing Sleeve - Purple
50pMore detail and information
Originally Purple but quickly fading to clear this sleeve fits on the inlet pin of Hambleton Bard Combined Inlet and Relief Valve.
-
Weltonhurst King Keg Cap O Ring & Spares Kit
£3.69More detail and information
A complete set of cap and valve seals for either the top or bottom tap King Keg, consisting of the clear cap 'O' ring, the black valve sealing washer, the black gas inlet sealing sleeve, the brown pressure release rubber and the black injection valve 'O' ring.
-
Hambleton Bard Inlet Valve Rubbers - Orange
50pMore detail and information
The spare seal for the Hambleton Bard Inlet Valve.
-
Weltonhurst Valve Sealing Washer - Black
60pMore detail and information
This black sealing washer fits on the flange of many barrel valves and makes the seal between the valve and the barrel cap.
-
8 gram Carbon Dioxide Bulb - pack of 10
£4.99More detail and information
CO2 Gas Bulbs - for carbonating your beers & cider.
These bulbs, 2 1/2" long and 3/4" in diameter, contain 8 grams of Carbon Dioxide, and can be used both in Sodasyphons as well as in suitable gas injectors. -
King Keg Cap Bored with O Ring
£5.50More detail and information
The centre of this cap is bored to accept a brass valve as fitted to King Kegs.
It comes fitted with a cap O ring but not with the brass valve itself. -
Spare Red Plastic Bulb Holder to fit Youngs 8 gram Bulb Injector
£3.00More detail and information
This is the spare bulb holder to fit the Young's Brass Combined Gas Inlet and Relief Valve.
-
Hambleton Bard Valve Sealing Washer - White
50pMore detail and information
This white washer, which is 2 1/2cm in diameter, makes the seal between either the Hambleton Bard Inlet Valve or the Hambleton Bard Inlet and Relief Valve and the barrel cap.
-
Hambleton Bard Inlet and Relief Valve Seal - Brown
50pMore detail and information
This relief valve seal fits both the Weltonhurst Brass Barrel Valve and the Hambleton Bard Inlet and Relief valve.
-
Hambleton Bard 8 Gram Injector Bulb Neck Seal - Red
60pMore detail and information
This red tubular sleeve fits around the bulb-piercing pin and makes the seal between the injector body and the CO2 bulb.
-
Hambleton Bard 8 Gram Injector Sealing Washer - Black
60pMore detail and information
This black sealing washer fits at the base of the adaptor and seals between this and the injection valve on the barrel.
-
Basic Barrel 2'' WH Drilled Cap with washer
£1.99More detail and information
This cap, which is bored to accept a barrel valve, fits those barrels with a white flat-sectioned cap washer.
-
8 gram Nitrous Oxide Bulbs - pack of 10
£5.00More detail and information
For that head of fine bubbles on stouts.
These bulbs, 2 1/2" long and 3/4" in diameter, contain 8 grams of pure food grade Nitrous Oxide, and can be used (with a suitable adaptor) to inject gas into stouts or other ales.
They can also be used with some models of whipped cream makers.
