Beer Making
Spare parts for beer barrels
-
Hambleton Bard S30 gas cylinder - new
£21.50
This is the most commonly used CO2 cylinder for topping up the pressure in home beer barrels. It can be used with each of the beer barrels shown on our website provided that it is fitted with a gas injection valve rather than a simple vent cap.
Just screw the cylinder down onto the valve to start the gas flowing and turn it back it again to stop.
The gas should be added to the keg in short bursts of 1 second to stop the cylinder freezing in the open position. Running the end of the cylinder under hot water prior to use will also help to prevent this.
These cylinders contain 245g of compressed Carbon Dioxide.
These cylinders are an economical way of adding CO2 to your beer.
You may also require...
-
Ritchie Barrel Valve
£9.50More detail and information
This is the combined gas inlet and pressure relief valve as fitted to both Bottom and Top Tap Weltonhurst King Kegs as well as to the Basic Barrels.
For carbonation use the S30 or S20 cylinders. -
Hambleton Bard Barrel Inlet only Valve
£6.99More detail and information
A brass gas inlet only valve.
As this has no built in pressure relief, do make sure that your barrel is fitted with an alternative safety valve please.
