Plastic barrels with capacities from 2 to 5 gallons.
Top Tap King Keg with S20/S30 valve£47.50
It has a capacity of 5.7 gallons, a combined gas inlet/relief valve for use with the Hambleton Bard S30 or can be used in conjunction with the Widget gas system, and is fitted with either the Beersphere or Latstock Float System.
It has a wide neck for easy cleaning and filling, twin drop handles for safe and easy handling, the base is strengthened and the neck thread is interrupted for safety.
A good barrelling option.
You may also require...
Brupaks - Bruclean - 200g£3.30
The choice of steriliser is a matter of personal preference.
Bruclean is now the only steriliser we use ourselves & is safe to use on all metals and plastics including aluminium.
We find it to be a highly effective, no-foam cleaner and steriliser, which is safe for use with all plastics and metals.
It is particularly effective in the cleaning.and sterilising of casks, fermenting vessels and tanks, with maximum recommended contact time 30 minutes.
Bruclean is an alkaline but non-caustic based detergent consisting of alkalis, wetting agents and sequesterants containing an available chlorine donor as a sterilant.
It can be used as a hot or cold solution.
For general cleaning, mix 5 – 10 grams of Bruclean per litre of hot or cold water & rinse equipment after use.
Excellent for automatic cask/keg washers and all CIP systems.
The wearing of rubber gloves for manual cleaning is recommended.
Storage and handling:
Store in a cool, dry place away from acids, ammonia or ammonium compounds.
Barrel Tap - Drum Style£3.60
The spare tap, nut and washer for the Beersphere, Brewmaster Keg, Hambleton Bard 4'' Neck, Bottom and Top Tap King Keg and most other beer barrels with a 4" neck.
Hambleton Bard 8 Gram Bulb Gas Injector£8.25
This adaptor enables the standard 8-gram CO2 bulbs to be used with most of the externally threaded barrel valves including those fitted with an S30 Valve (to take the S30 Cylinders).
If however, your barrel is not already fitted with a valve you should consider the Young's Brass Combined Gas Inlet and Relief Valve.
Approximate pressure tolerance: 5 psi.
Weltonhurst Brass Barrel Valve Inlet Sealing Sleeve - Black60p
This is the inlet seal for the combined gas inlet and pressure relief valve which is fitted to Bottom and Top Weltonhurst King Kegs, Brewmaster Kegs and to Basic Barrels.
Weltonhurst King Keg Cap O Ring & Spares Kit£3.90
A complete set of cap and valve seals for either the top or bottom tap King Keg, consisting of the clear cap 'O' ring, the black valve sealing washer, the black gas inlet sealing sleeve, the brown pressure release rubber and the black injection valve 'O' ring.
Tap Washer - Black90p
A replacement tap washer which makes the seal between the body of the barrel and either a lever or drum style tap.
Sodastream Valve Adapter£9.99
This adapter screws on the end of the Sodastream Cylinder and enables it to be used with the Weltonhurst and the Hambleton Bard barrel valves.
Please note that this fits the older style steel Sodastream cylinders but not the newer aluminium ones!
King Keg 4'' Cap with O ring and S30 type Valve£11.50
This cap is fitted with a brass combined inlet and relief valve for use with S30 type gas cylinders.
It comes complete with a cap O ring.
Approximate pressure tolerance: 5 psi.
Weltonhurst Valve Sealing Washer - Black60p
This black sealing washer fits on the flange of many barrel valves and makes the seal between the valve and the barrel cap.
This float is now the standard fitting on both the Top Tap King Keg and the Brewmaster Barrel.
It is easy to fit these to a 4" neck barrel but we have also sucessfully fitted them into 2" neck ones.
This has a 3/4" BSP thread and it fits the Plastic Drum Tap fitted to Beersphere, Brewcraft and King Keg barrels.
King Keg Cap Bored with O Ring£5.50
The centre of this cap is bored to accept a brass valve as fitted to King Kegs.
It comes fitted with a cap O ring but not with the brass valve itself.
Hambleton Bard Inlet and Relief Valve Seal - Brown60p
This relief valve seal fits both the Weltonhurst Brass Barrel Valve and the Hambleton Bard Inlet and Relief valve.
Cap Spanner£7.95 More detail and information
Hambleton Bard S30 gas cylinder - new£22.00
This is the most commonly used CO2 cylinder for topping up the pressure in homebrew beer barrels - e.g.King Kegs.
It can be used with each of the beer barrels shown on our website provided that it is fitted with a gas injection valve rather than a simple vent cap.
Just screw the cylinder down onto the valve to start the gas flowing and turn it back it again to stop.
The gas should be added to the keg in short bursts of 1 second to stop the cylinder freezing in the open position. Running the end of the cylinder under hot water prior to use will also help to prevent this.
These cylinders contain 245g of compressed Carbon Dioxide.
Better value than a box of the CO2 Bulbs (approx 80 gms).
Once fully utilised simply get a re-fill - see separate item.
These cylinders are an economical way of adding CO2 to your beer.
Homebrew Kit£42.00 More detail and information
Barrel Tap - Sparkler Style£16.00
Tired of the usual barrel tap? Need a better head?
Try this little beauty, easier control with a sparkler attachment.
This tap has a vertical lever flip top action, it can be pressed down or pulled up and locked open.
It has a sparkler nozzle that can be adjusted to perfectly control he head on your beer, the difference that this tap can make is amazing.