Beer Making
Plastic barrels with capacities from 2 to 5 gallons.
-
5 Gallon Basic White Plastic Barrel - with cap with pressure relief valve
£22.95
This barrel has a capacity of 5 1/2 gallons which makes it ideal for the storage and dispensing of up to 5 gallons of beer or cider.
It is fitted with a screw cap with a built in pressure relief valve.
The barrel has a small 2" diameter neck which limits access for cleaning.
You may also require...
-
Flat White WH Cap Washers
£1.25More detail and information
This is the replacement cap washer for the 2" barrel caps that are sealed with a flat-sectioned white cap washer.
-
Weltonhurst Brass Barrel Valve Inlet Sealing Sleeve - Black
50pMore detail and information
This is the inlet seal for the combined gas inlet and pressure relief valve which is fitted to Bottom and Top Weltonhurst King Kegs, Brewmaster Kegs and to Basic Barrels.
-
Basic Barrel WH 2'' Cap with O ring and Brass Inlet & Relief Val
£9.99More detail and information
This cap has a combined inlet & pressure release valve and fits the latest Weltonhurst 5gallon basic barrels. It can be used with either a Hambleton Bard Super 20 or Super 30 cylinder, a Sodastream cylinder fitted with a Sodastream valve adaptor or with a Hambleton 8 gram bulb Gas Injector. The seal between this cap and the barrel is made with a white flat-sectioned washer.
-
Quick Serve Lever Action Tap
£2.75More detail and information
The spare tap and washer to fit barrels with 2" diameter necks.
-
Sodastream Valve Adapter
£9.99More detail and information
This adapter screws on the end of the Sodastream Cylinder and enables it to be used with the Weltonhurst and the Hambleton Bard barrel valves.
Please note that this fits the older style steel Sodastream cylinders but not the newer aluminium ones! -
Basic Barrel 2'' WH Vented Cap with washer
£2.25More detail and information
This cap, which has a moulded in Relief Valve, fits those barrels with a white flat-sectioned cap washer.
-
Weltonhurst Valve Sealing Washer - Black
60pMore detail and information
This black sealing washer fits on the flange of many barrel valves and makes the seal between the valve and the barrel cap.
-
Young's 8 gram Bulb Injector
£9.99More detail and information
This unit consists of a Brass Combined Gas Inlet and Pressure Relief Valve fitted with a Stainless Steel Pin to pierce 8 gram CO2 bulbs and a red gas bulb holder. The valve will need to be fitted into a barrel cap that has been drilled to accept it and as such cannot be fitted to a basic 2" barrel cap with a moulded in pressure relief valve.
If your barrel is already fitted with a brass threaded valve and you want to use 8 gram bulbs with it you should consider the Hambleton Bard 8 gram bulb gas injector. -
Spare Red Plastic Bulb Holder to fit Youngs 8 gram Bulb Injector
£3.00More detail and information
This is the spare bulb holder to fit the Young's Brass Combined Gas Inlet and Relief Valve.
-
Basic Barrel WH 2'' Cap + O ring and Brass Pin Inlet & Relief
£12.99More detail and information
This cap has a combined inlet & pressure release valve fitted with a pin to pierce 8 gram CO2 bulbs and it comes complete with a red plastic CO2 bulb holder. The pin makes this cap and valve unsuitable for use with any other form of gas injection cylinder. The seal between this cap and the barrel is made with a white flat-sectioned washer.
-
Hambleton Bard Inlet and Relief Valve Seal - Brown
40pMore detail and information
This relief valve seal fits both the Weltonhurst Brass Barrel Valve and the Hambleton Bard Inlet and Relief valve.
-
Basic Barrel WH 2'' Vented Cap Relief Seal - White
50pMore detail and information
This seal fits over the relief valve pin in the centre of the Basic Barrel 2" WH vented cap.
