Beer Making
Plastic barrels with capacities from 2 to 5 gallons.
-
5 Gallon Basic White Plastic Barrel - with valved cap and 8 gram gas injector
£34.99
This barrel has a capacity of 5 1/2 gallons which makes it ideal for the storage and dispensing of up to 5 gallons of beer or cider.
It comes with a cap which has a combined inlet & pressure release valve fitted with a pin to pierce 8 gram CO2 bulbs and is complete with a red plastic 8 gram CO2 bulb holder. The pin makes this cap and valve unsuitable for use with any other form of gas injection cylinder.
The barrel has a small 2" diameter neck which limits access for cleaning.
You may also require...
-
Flat White WH Cap Washers
£1.25More detail and information
This is the replacement cap washer for the 2" barrel caps that are sealed with a flat-sectioned white cap washer.
-
Weltonhurst Brass Barrel Valve Inlet Sealing Sleeve - Black
50pMore detail and information
This is the inlet seal for the combined gas inlet and pressure relief valve which is fitted to Bottom and Top Weltonhurst King Kegs, Brewmaster Kegs and to Basic Barrels.
-
Quick Serve Lever Action Tap
£2.75More detail and information
The spare tap and washer to fit barrels with 2" diameter necks.
-
Basic Barrel 2'' WH Vented Cap with washer
£2.25More detail and information
This cap, which has a moulded in Relief Valve, fits those barrels with a white flat-sectioned cap washer.
-
8 gram CO2 Bulb - pack of 10
£4.99More detail and information
These bulbs, 2 1/2" long and 3/4" in diameter, contain 8 grams of Carbon Dioxide, and can be used both in Sodasyphons as well as in suitable gas injectors.
-
Young's 8 gram Bulb Injector
£9.99More detail and information
This unit consists of a Brass Combined Gas Inlet and Pressure Relief Valve fitted with a Stainless Steel Pin to pierce 8 gram CO2 bulbs and a red gas bulb holder. The valve will need to be fitted into a barrel cap that has been drilled to accept it and as such cannot be fitted to a basic 2" barrel cap with a moulded in pressure relief valve.
If your barrel is already fitted with a brass threaded valve and you want to use 8 gram bulbs with it you should consider the Hambleton Bard 8 gram bulb gas injector. -
Spare Red Plastic Bulb Holder to fit Youngs 8 gram Bulb Injector
£3.00More detail and information
This is the spare bulb holder to fit the Young's Brass Combined Gas Inlet and Relief Valve.
-
Basic Barrel WH 2'' Cap + O ring and Brass Pin Inlet & Relief
£12.99More detail and information
This cap has a combined inlet & pressure release valve fitted with a pin to pierce 8 gram CO2 bulbs and it comes complete with a red plastic CO2 bulb holder. The pin makes this cap and valve unsuitable for use with any other form of gas injection cylinder. The seal between this cap and the barrel is made with a white flat-sectioned washer.
-
Hambleton Bard Inlet and Relief Valve Seal - Brown
40pMore detail and information
This relief valve seal fits both the Weltonhurst Brass Barrel Valve and the Hambleton Bard Inlet and Relief valve.
