General
Glass and plastic bottles in a range of capacities.
-
Clear PET Bottles With Screw Cap - 1 litre
from 55p
Clear, sturdy, greatest volume for money.
These are deceptively strong and, being light in weight.
These are great for either sparkling wine beer cider & lager.
Do remember never to store any beer in clear bottles in direct sunlight.
The exposure of the iso-alpha-acids in the beer to any ultraviolet radiation leads to the formation of prenyl mercaptan, a "skunky" smelling compound.
Just stash the beer away out of direct sunlight and it will help keep the contents cool as well!
Any over carbonation is easily detected & released too.
Reusable.
Great value bottle
You may also require...
-
Bottle Filling Stick
£3.95More detail and information
Simplify bottling.
A brilliant yet simple device to minimise disappointing spillages.
This Canadian made bottle filler is fitted with a spring free gravity led valve at it's base.
To fill simply allow the filler to rest on the bottom of the bottle.
The weight of the filler itself is sufficient to open the valve and allow flow.
To stop, simply lift the tube from the base of the bottle, and the flow will stop.
This works equally well with either wine or beer. It best used with 5/16'' syphon tubing. -
Syphon Tubing PVC - 5/16'' internal diameter
£1.20More detail and information
A 2-metre length of food grade PVC tubing with 1/16" wall thickness.
If you order 2 units of this item you will receive one 4- metre length in one piece, 3 units as a 6 metre length etc. -
Replacement Screw Caps to fit Clear 1 litre PET bottles
11pMore detail and information
These caps fit the 1-litre PET bottles above.
-
45 Bottle Drainer - Rotating Base
£17.49More detail and information
Take the chore out of cleaning bottles.
An Italian made 45 bottle tree which holds beer & wine bottles allowing them to drain after washing and rinsing.
It is all plastic, has a rotating base with a maximum diameter of 39cm, and the overall height is 51cm.
An absolute boon minimising the chore of washing bottles.
Use with the associated rinser reservoir. -
Bottle Rinser - fits 45 Bottle Drainer
£14.99More detail and information
This rinser in designed to fit onto the top of the 45 bottle tree.
Firstly fill the bowl with sulphite solution (e.g. Sodium Metabisulphite or VWP at the rate of a tea-spoonful per litre of water) and then push the clean bottle down on the spring loaded pump.
The solution is pumped into the bottle sterilising all its internal surfaces.
Then place the bottle onto the tree to drain (there is no need to rinse off the sulphite) and in ten minutes the bottles are ready for use. -
80 Bottle Drainer - Stationery Base
£18.25More detail and information
Minimise the task of bottle washing.
An Italian made 80 bottle tree which holds beer & wine bottles allowing them to drain after washing and rinsing.
It is all plastic, has a non rotating base with a maximum diameter of 40cm, and the overall height is 65cm.
An absolute boon minimising the chore of washing bottles.
Use with the assoiated reservoir. -
Bottle Rinser - fits 80 bottle drainer
£15.75More detail and information
This rinser in designed to fit onto the top of the 80 bottle tree. Firstly fill the bowl with sulphite solution and then push the clean bottle down on the spring loaded pump. The solution is pumped into the bottle sterilising all its internal surfaces.
Then place the bottle onto the tree to drain (there is no need to rinse off the sulphite) and in ten minutes the bottles are ready for use.
