Beer Making
Spare parts for beer barrels
-
Basic Barrel WH 2'' Cap with O ring & Brass Inlet & Relief Valve - S30 Cap
£9.99
This cap has a combined inlet & pressure release valve and fits the latest Weltonhurst 5gallon basic barrels.
It can be used with a Hambleton Bard Super 30 cylinder, a Sodastream cylinder fitted with a Sodastream valve adaptor or with a Hambleton 8 gram bulb Gas Injector.
The seal between this cap and the barrel is made with a white flat-sectioned washer.
You may also require...
-
Hambleton Bard 8 Gram Bulb Gas Injector
£7.99More detail and information
This adaptor enables the standard 8-gram CO2 bulbs to be used with most of the externally threaded barrel valves including those fitted with an S30 Valve (to take the S30 Cylinders).
If however, your barrel is not already fitted with a valve you should consider the Young's Brass Combined Gas Inlet and Relief Valve. -
Hambleton Bard S30 gas cylinder - new
£21.50More detail and information
This is the most commonly used CO2 cylinder for topping up the pressure in home beer barrels. It can be used with each of the beer barrels shown on our website provided that it is fitted with a gas injection valve rather than a simple vent cap.
Just screw the cylinder down onto the valve to start the gas flowing and turn it back it again to stop.
The gas should be added to the keg in short bursts of 1 second to stop the cylinder freezing in the open position. Running the end of the cylinder under hot water prior to use will also help to prevent this.
These cylinders contain 245g of compressed Carbon Dioxide.
These cylinders are an economical way of adding CO2 to your beer. -
Hambleton Bard S30 gas cylinder - refill
£4.60More detail and informationThis is the most commonly used refillable CO2 cylinder for topping up the pressure in home beer barrels. It can be used with each of the beer barrels shown on our website provided that it is fitted with a gas injection valve rather than a simple vent cap.
Just screw the cylinder down onto the valve to start the gas flowing and turn it back it again to stop.
The gas should be added to the keg in short bursts of 1 second to stop the cylinder freezing in the open position.
Running the end of the cylinder under hot water after use will also help to prevent this.
These cylinders contain 245g of compressed Carbon Dioxide.
Please note that as this item is a refill we will need to receive an empty cylinder from you before we dispatch your order:
Hop Shop, 22 Dale Road, Plymouth, PL4 6PE.
