Beer Making
Spare parts for beer barrels
-
Young's 8 gram Bulb Injector
£9.99
This unit consists of a Brass Combined Gas Inlet and Pressure Relief Valve fitted with a Stainless Steel Pin to pierce 8 gram CO2 bulbs and a red gas bulb holder.
The valve will need to be fitted into a barrel cap that has been drilled to accept it and as such cannot be fitted to a basic 2" barrel cap with a moulded in pressure relief valve.
If your barrel is already fitted with a brass threaded valve and you want to use 8 gram bulbs with it you should consider the Hambleton Bard 8 gram bulb gas injector.
You may also require...
-
8 gram Carbon Dioxide Bulb - pack of 10
£4.99More detail and information
CO2 Gas Bulbs - for carbonating your beers & cider.
These bulbs, 2 1/2" long and 3/4" in diameter, contain 8 grams of Carbon Dioxide, and can be used both in Sodasyphons as well as in suitable gas injectors. -
Spare Red Plastic Bulb Holder to fit Youngs 8 gram Bulb Injector
£3.00More detail and information
This is the spare bulb holder to fit the Young's Brass Combined Gas Inlet and Relief Valve.
-
Basic Barrel WH 2'' Cap + O ring and Brass Pin Inlet & Relief
£12.99More detail and information
This cap has a combined inlet & pressure release valve fitted with a pin to pierce 8 gram CO2 bulbs and it comes complete with a red plastic CO2 bulb holder.
The pin makes this cap and valve unsuitable for use with any other form of gas injection cylinder.
The seal between this cap and the barrel is made with a white flat-sectioned washer. -
Barrel Valve - for use with 8g bulbs only
£9.50More detail and information
This barrel valve is fitted with bulb piercing pin which is not removable.
It can be used, with a suitable bulb holder, with 8gm bulbs but is NOT suitable for use with either S20 or S30 gas cylinders. -
Basic Barrel 2'' WH Drilled Cap with washer
£1.99More detail and information
This cap, which is bored to accept a barrel valve, fits those barrels with a white flat-sectioned cap washer.
-
8 gram Nitrous Oxide Bulbs - pack of 10
£5.00More detail and information
For that head of fine bubbles on stouts.
These bulbs, 2 1/2" long and 3/4" in diameter, contain 8 grams of pure food grade Nitrous Oxide, and can be used (with a suitable adaptor) to inject gas into stouts or other ales.
They can also be used with some models of whipped cream makers.
